https://www.trivenipackaging.com/products-details/c-1000-c-2000automatic-case-erectors/

C-1000/C-2000

Lantech’s case erectors are easy to use, safe, reliable and provide 100% precise control through the entire forming process. The proactive system where blanks are pulled into their next position versus being forced ensures the case performs as designed and is produced with maximum efficiency. Below are just a few of the advantages to choosing Lantech case erectors

  • Ergonomic blank loading
  • Precise case forming
  • Sequential flap folding
  • Auto adjustment for case variations
  • Easy tape change
  • Precision glue patterns
  • Safe operation
  • Fast and easy changeover

Blank Delivery Control System

Powered magazine infeed belts precisely govern the delivery speed of the case blanks to the pick-up arm, avoiding the first jam point when blanks are not fed correctly. The magazine also provides easy, walk-in loading.

Blank Separation System

A system of multiple separation retainers ensure the blanks are spaced correctly and enter the machine one at a time, in a vertical upright position precisely at the time the pick-up arm is ready to capture the blank.

Square Case Delivery System

A hinged pick-up frame with eight vacuum powered suction cups firmly grips two panels of the case to ensure square case creation. While the case is held at a 90 degree angle all flaps are folded and locked in the shape.

Stationary Flap Folders & Pusher Bar

All flaps are folded while the case remains stationary and utilizes only a single pusher bar to slide the squared case into the exit side belts, maintaining 90 degree angles and minimizing the resistance forces on the case.

Spring Loaded Side Belts

Synchronized motors and the spring load feature of the dual-side exit drive belt accounts for variability in the width of the case, maintaining the square footprint without crushing the case as it is pulled across the bottom closing unit.

  • Technical Specification

  • C-1000
  • C-2000
  • Performance
  • Throughput Speed
  • 10 Cases/Minute (30 CPM option)
  • 8 Cases/Minute (25 CPM with option)
  • Case Size Minimum (Outside Dimensions)
  • 200 mm L x 150 mm W x 150 mm C
  • 200 mm L x 150 mm W x 150 mm C
  • Case Size Maximum (Outside Dimensions)
  • 500 mm L x 325 mm W x 520 mm C
  • 620 mm L x 450 mm W x 650 mm C
  • Case Criteria
  • Case Types
  • RSC, HSC, FEFCO 0200/0201
  • RSC, HSC, FEFCO 0200/0201
  • Flute Types
  • B, C, E or Combinations
  • B, C, E or Combinations
  • Wall Types
  • Single & Double Wall (test for multiple wall)
  • Single & Double Wall (test for multiple wall)
  • Bottom Seal
  • Tape
  • Lantech TH-Series
  • Lantech TH-Series
  • Hot Melt
  • Refer to Manufacturer Manual
  • Refer to Manufacturer Manual
  • Service Requirements
  • Air Supply
  • 6 Bar (80 Psi)
  • 6 Bar (80 Psi)
  • Dedicated Electric Service Req. EU
  • 3L-PE-400V-50Hz-Neutral
  • 3L-PE-400V-50Hz-Neutral
  • Machine Data
  • Magazine infeed Capacity
  • 200 Cases (approximate)
  • 200 Cases (approximate)
  • Weight
  • 700 kg
  • 825 kg
  • Dimensions
  • 1955 mm L x 2280 mm W x 1800 mm H
  • 2235 mm L x 2480 mm W x 1800 mm H
  • Outfeed Pass Height
  • 600 mm +/- 30 mm
  • 600 mm +/- 30 mm

 

You may be interested in our Carton Sealing Tape.

Download PDF